P2 Revitalise Contact Lens Multipurpose Solution (350 ml/bottle)
Lens disinfectant / storing solution

P2 Revitalise multi-purpose solution is used for cleaning, disinfecting and storing soft contact lenses
Contains HA, which forms a wetting layer on your lenses by retaining moisture, giving your eyes longer lasting comfort.

Free travel kit with every 2 sets of bottles purchased
2 sets = 355ml bottle x6 + 10ml tubes x5 + lens case x6

 

Indications:
  • For all soft contact lenses, cosmetic coloured or transparent, including silicone hydrogel.
  • For use in the daily cleaning, rinsing and storage of silicone hydrogel and soft (hydrophilic) contact lenses as recommended by your eye care practitioner.

Instruction for use

  • You should wash, rinse and dry your hands well before handling the product.
  • To open for the first time: Bottle is completely sealed for maximum protection of solution. Unscrew cap, and discard the safety ring. After removing the safety ring, screw in the cap tightly untill the cone pin punctures the bottle tip and breaks the seal. The cone pin will also reseal the opened bottle.
  • Step 1: Please a few drops of P2 multi-purpose solution on the lens and rub both sides gently for 20 seconds.
  • Step 2: Rinse the lens thoroughly with P2 multi-purpose solution to remove debris.
  • Storage: Please the lenses in a lens case filled with fresh P2 multi-purpose solution. Soak for at least 4 hours for lens lubrication and moisturizing (for extra comfort), protein removal and disinfection. [For protein remover, check our Ultrazyme or Supraclens listing for more effective solution.]
  • Step 3: Rinse soaked lenses with fresh P2 multi-purpose solution before placing onto eyes. Discard the solution in the len case, wash the lens case clean and air dry, including the covers.

Always follow your eye care professional’s instructions. Based upon your individual tear chemistry and lens-wearing schedule, your eye care professional may recommend additional products or procedures.

 

Precautions/Notes

  • Always discard solution from lens case after each use. Re-use of solution or use of water with lenses may lead to contamination resulting in eye injury and potential loss of vision.
  • Never put the solution directly into the eye.
  • Keep the product tightly closed when not in use and avoid all contact between the dropper and any surface to prevent contamination.
  • Use before expiration date. Make sure the seal is not broken before using the product for the first time. Once open, use within 90 days.
  • Stop use and ask a doctor if you experience eye pain, changes in vision, continued redness or irritation of the eye, or if the condition worsens or persists for more than 72 hours.
  • Store at temperature between 15 to 30°C, in cool, dry places. Do not freeze. Avoid prolonged exposure to light.
  • Keep the product out of reach of children.
  • Water can harbor microorganisms that can lead to severe infection, vision loss or blindness. If your lenses have been submersed in water such as when swimming in pools, lakes, or oceans, you should discard them and replace them with a new pair. Ask your eye care practitioner for recommendations about wearing your lenses during any activity involving water.
  • Never use water, saline solution, or rewetting drops to disinfect your lenses. These solutions will not disinfect your lenses. Not using the recommended disinfectant can lead to severe infection, vision loss or blindness.
  • Do not mix with other fluids except as directed and do not administer to the eye concurrently with any eye medicament except on medical advice. If unsure, please consult your doctor.
  • Do not use with any heat disinfecting method.
  • The product is not a substitute for daily lens cleaner or protein remover.

    For more information, please read insert manual.

    Lens Case Care

  • Rinse your lens case with sterile contact lens solution (never use tap water) and leave the lens case open to dry after each use. Turn the case over and shake any excess solution out of the case. Be sure that no residual solution remains in the case before you allow it to air dry.
  • Never use the same lens case for more than 3 months. Rinse the lens case thoroughReplace your lens case at least once every one to three months. Contact lens cases can be a source of bacterial growth.

 

Contents: A borate buffered, sterile, isotonic solution containing polyhexanide, EDTA, hydroxypropyl methylcellulose, poloxamer 407, sodium hyaluronate, propylene glycol.
IF YOU ARE ALLERGIC TO ANY INGREDIENTS IN THIS PRODUCT, DO NOT USE.


Sign up for our Latest Promotion

Sign up now and receive an email once



I agree to have my personal information transfered to MailChimp ( more information )

You may unsubscribe at any time.

Pack

1 bottle, 3 bottles, 6 bottles + Free 50ml